Gobos
Each luminaire contains two gobo wheels:
•
One rotating gobo wheel with seven rotatable, indexable gobo positions (refer to
Wheel"
•
One fixed gobo wheel with ten easily loaded patterns and one open position capable of continuous
rotation for additional effects (refer to
CAUTION: VL440 / VL770 / VL880 Luminaires accept glass gobos only. Use of metal gobos in
these luminaires may damage gobo assembly and will void the luminaire warranty.
Rotating Gobo Wheel
When replacing the standard gobo load with replacement or custom gobos, please observe the
following:
•
On the Rotating Gobo wheel, POSITION 4 (standard gobo is Tri Cone), must have a locating
magnet for proper calibration and indexing. Refer to
information.
•
All other positions (1, 2, 3, 5, 6, and 7) will use a gobo or gag without a locating magnet.
•
When ordering a custom rotating gobo, use the following order guidelines:
Order Number
21.6004.XXXX.01
21.6004.XXXX.02
•
Standard load rotating gobos are outlined in
Positions," on page
Note: "XXXX" represents gobo or gag pattern number. For all available patterns and their associated
numbers, refer to VARI❋IMAGE System page on the Philips Vari-Lite web site or contact your local
regional sales manager or Authorized VARI❋LITE Dealer.
•
Locating magnets are only applicable to gobo assemblies in the rotating gobo wheel. The fixed
gobo wheel does not have a gobo assembly with a magnet.
02.96 87.000 1 C
below).
Description
Rotating Gobo Assembly, VL440/770/880 (without locating magnet)
Rotating Gobo Assembly, VL440/770/880 (with locating magnet)
32.
31 Octo be r 20 13
O
: C
PERATION
OLOR
"Fixed Gobo Wheel" on page
Figure 3-2
Table 2, "Rotating Gobo Wheel - Standard Effects and
C
& G
ONTROL
OBOS
"Rotating Gobo
33).
on
page 32
for additional
3
31