Bosch KMA 802 Instandsetzungsanleitung Seite 35

11. Check that both Y hose nozzles are properly seated
in their supports.
458730-2PA
Fig. 26: Position y hose nozzle
12. Place the cover back over the hydraulic chamber on
the measuring cell carrier.
13. Cut the rubber hose (2000 x 19 x 3.5) into two
lengths of 1000 mm.
14. Replace the rubber hose (Fig. 27, items 5 and 6)
with the two 1000 mm hose lengths.
5
Fig. 27: KMA return hose
Robert Bosch GmbH
Converting the KMA | KMA 802 / KMA 822 | 35
6
en
|
1 689 975 141 2017-09-19