Maintenance And Troubleshooting; Safety Instructions; Transmitter And Conductivity Sensor Maintenance; Replacing The Cover Seal On The Connection Box - bürkert 8222 ELEMENT neutrino Bedienungsanleitung

Type 8222 ELEMENT neutrino
Maintenanceandtroubleshooting
11. MAiNTENANcE ANd
TRoubLEshooTiNG
11.1.

safety instructions

danger
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure before
loosening the connections.
Risk of injury due to electrical discharge.
• Shut down and isolate the electrical power source before
carrying out work on the system.
• Observe all applicable accident protection and safety regula-
tions for electrical equipment.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
Warning
Risk of injury due to nonconforming maintenance.
• Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
• Ensure that the restart of the installation is controlled after any
interventions.
english
11.2. Transmitter and conductivity
sensor maintenance
• During cleaning of the sensor, take care not to scratch its
surface.
• Store the sensor dry .
The neutrino transmitter 8222 can be cleaned with water or using a
detergent compatible with the materials it is made of.
Regularly check if the conductivity sensor is dirty; clean it if
necessary using a compatible product.
Please feel free to contact your Bürkert supplier for any additional
information.
11.3. Replacing the cover seal on the
connection box
→
Using a screwdriver
with a suitable head,
turn the latch to the
u n l o c k p o s i t i o n
t o u n l o c k t h e
connection box.
31