Technical Data; Noise/Vibration Information - Reich 3717 Technische Daten

4 I English
1

TECHnICAL DATA

Type
Dimensions mm
Weight kg (without fasteners)
single sequential
Recommended operating pressure
range
Maximun permissible operating
pressure
Air consumption per driving
operation
Magazine capacity.
no. of fasteners
Penetration depth setting
Fasteners: pin and brad nails(Micro Brads)
Pin nail/nail length mm
Wire thickness mm
Recommended lubricant
1 litre special oil. Code no.
250 cm3 grasa especial. Code no.
2

nOIsE/VIbRATIOn InFORMATIOn

Noise characteristic values *
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
A-weighted sound power level
L WA, 1s, d
Vibration characteristic values**
Weighted r.m.s.-acceleration (a)
The noise level when working can exceed 85
db (A). Wear ear protection!
* Measured values determined according to
En 12549:1999.
** Measured values determined according to
IsO 8662-11:1999
3 suPPLIED WITH
1 Micro-brad nailer
1 safety instructions
1 Technical data sheet
1 Transport case
Karl M. Reich Verbindungstechnik GmbH
4
3717
Only those fasteners specified under technical data
(see 1) may be used.
185/240
When filling the magazine, hold the tool so that the
0,98 kg
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
4 - 7 bar/
yoke or trigger depressed.
0,4 - 0,7 MPa
Place the tool on its side. Press the locking lever (l)
and pull the magazine rail (m) back. Introduce the brad
7 bar / 0,7 MPa
nails or pins tip downwards and push the magazine
0,16 l at 6 bar /
rail forward until it locks into place.
0,6 MPa
5
150
no
The brad nailer is equipped with single trigger release
and has a release catch on the trigger. To trigger a
driving process, the release catch (u) which is located
12-30
behind the trigger has to be actuated first.
0,80
6
9 4420
68 3868
balancer for 10 - 20 n (1.0 - 2.0 kp),
cable travel 1.6 m (5.2 ft).
3717
85 dB(A)
92 dB(A)
< 3,2 m/s2
fIllInG The MaGaZIne
ACTuATIOn DEVICE
ACCEssORIEs
3717
Code No.
40 3393
REICH ®