System Lay-Out; Technical Features - RIB RAPID N Bedienungsanleitung

SYSTEM LAY-OUT

280/11,2"x300/12"
❶
❷
❸
❷
❸
❷
❸
1 - RAPID N barrier
2 - Photoelectric cells
3 - Galvanized column for P.E. cells
4 - Strip with Photo electric cells
Parts to install according to EN 12453 standard
COMMAND TYPE
Hold-to-run operation
Impulsive - in sight
(e.g. push-button)
impulsive - out of sight (e.g. remote)
automatic
* a typical example are those doors which do not have access to any public way
A: Hold-to-run operation made by push-button ex: code ACG2013
B: Hold-to-run operation made by key selector ex: code ACG1010
C: Adjustable power of the motor or photocells to respect impact forces as indicated in Annex A
D: Safety strips and/or other additional devices to reduce the probability of contact with the door.
E: Devices installed in such a way that a person can not be touched by the door.
❺
5 - Magnetic loop
- Key selector
- Tuned aerial
USE OF THE SHUTTER
Skilled persons Skilled persons
(out of public area*) (public area)
A B
C or E C or E
C or E C and D, or E
C and D, or E C and D, or E
6000/236"
❹

TECHNICAL FEATURES

Ambidextrous irreversibile operator endowed with a control panel, used for the
intesive movement of boom arms from 3 to 6 m long.
The cabinet of the operator is treated with cataphoresis and thermal spray
❷
coating.
The barrier boom can be supplied as a single piece or, in the case high objects
may hinder its travel, you can require it in the articulated version, specifying the
❸
height of this obstacle from the ground.
The barrier boom with RIB profile is constructed for being fitted with a pneumatic
safety strip or with a photocell strip.
N.B. You must make installation features comply with laws and standards in
force.
❷
TECHNICAL
❸
DATA
Max. boom lenght
Opening time
❷
EEC Power supply
❸
Motor capacity
Power absorbed
Capacitor
Max. torque
Power supply
2
Motor capacity
Power absorbed
Capacitor
Max. torque
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
Not skilled persons
Service
Not possible
Guaranteed consecutive cycles
Lubrification
C and D, or E
Weight of electroreducer
C and D, or E
Working Temperature
C and D, or E
Protection IP
ASSEMBLING RAPID N
After you have cemented in the base plate where you want it, mount RAPID N
using the nuts provided and a no. 19 hexagonal wrench.
25
Measurements
in mm/inch
1
RAPID N
m/in 6/236"
s 6
230V~ 50Hz 220V~ 60Hz
W 242 285
1,07 1,31
A
µF 10 10
Nm/lbsm 155/70 141/64
120V~ 60Hz
W 186
A 2,07
25
µF
Nm/lbsm 105/47,7
2400 - 6s/2s
n°
2400 - 6s/2s
n°
n° 1500 for boom 3-4-5-6 m
100%
1500 for boom 3-4-5-6 m
n°
SHELL OMALA S2 G100
62
kg
°C -10 ÷ +55
IP 54
G
B