Trouble Shooting; Error Correction - Parkside PKGA 12 A Originalbetriebsanleitung

Trouble shooting

Problem
Device doesn't start
Bad cutting results
Spray attachment (
13) not spraying
Possible Cause
Equipment is not charged
Switch lock ( 3) has not
been operated properly
On/off switch (
be defective
Too much friction due to
lack of lubrication
Dirty blade( 10/12)
Blade ( 10/12) is blunt
or has nicks
Blade ( 10/12) is dam-
aged
Nozzle ( 18) blocked

Error correction

Charge equipment (Observe the sep-
arate operating instructions for the
rechargeable battery and charger)
Switch on (see „Operation")
5) may
Repair by Service Centre
Lubricate blade (
(see „Cleaning/Maintenance")
Clean blade (see „Cleaning/
Maintenance")
Sharpen blade (see „Cleaning/
Maintenance") or replace (see
„Spare parts/Accessories")
Replace blade (see „Spare parts/
Accessories")
Clean nozzle (
ning/Maintenance")
GB IE NI
10/12)
18) (see "Clea-
CY
15