GB
IE
Wall mounted charger
(optional)
You can also mount the charger (5) on the
wall.
•
Using dowels, place two screws hori-
zontally 152.4 mm (6") apart at the
desired position on a wall.
•
The screw head can have a diameter
of 7 - 10 mm.
•
Leave the screw heads protruding at
a distance of approx. 10 mm from the
wall.
•
With the openings of the wall bracket,
you can attach the charger (5) to the
two screws and pull the charger down
until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Cleaning
Clean the charger (5) with a dry brush or
dry cloth.
Keep the charger (5) away from moisture
and sharp objects.
Maintenance
•
The equipment is maintenance free.
18
Disposal/environmental
protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Electric units do not belong with do-
mestic waste.
•
Return the unit and the recharger to a
recycling centre. The plastic and metal
parts employed can be separated out
and thus recycled use can be imple-
mented. Ask our Service-Center for
details.
•
Dispose of batteries in discharged condi-
tion. We recommend covering the pole
with adhesive tape to prevent a short
circuit. Do not open up the battery.
•
Dispose of batteries in accordance
with the local regulations. Take batter-
ies to an old battery collection point
where they will be recycled in an envi-
ronmentally friendly manner. For infor-
mation about this, ask your local waste
management company or our service
centre.
•
Defective units returned to us will be
disposed of for free.
•
Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.