Combination Possibilities; Intended Use; Environmental Conditions - Ottobock 4R111-N Gebrauchsanweisung

Reference Distal connection
number
4R119=N, Threaded connector
4R119=NT
4R119, Pyramid receiver, rotating
4R119=T,
4WR95=1
Lamination anchor, three-arm
Reference Distal connection
number
4R41 Pyramid receiver, rotating
4R42 Pyramid adapter
4R42=1 Pyramid adapter with 9.5 mm
bore for shuttle lock
4R43 Threaded connector
4R89 Pyramid adapter, rotating

1.2 Combination possibilities

This prosthetic component is part of the Ottobock modular system
and can be combined with other components of this modular system.
Any restrictions regarding the combination possibilities are listed in
this section. Contact the manufacturer with questions.

2 Intended use

2.1 Indications for use
The product is to be used solely for lower limb prosthetic fittings.
2.2 Area of application
Product approved for max. body weight
• The maximum approved body weight is specified in the technical
data (see Page 18).
12
Figure Additional constraints
4R41, 4R42, 4R42=1, 4R43, 4R89, 4R111, 4R111=N, 4R116,
•
4R117, 4R117=T, 4R119=NT, 4R119=T: Use of products per­
see fig. 5
missible in TT prostheses and TF prostheses.
• 4R111=T, 4R116=T, 4R119, 4R119=N, 4WR95=1, 4WR95=2:
see fig. 6
Use of product only permitted in TF prostheses.

2.3 Environmental conditions

4R41, 4R42, 4R42=1, 4R43, 4R89, 4R111, 4R111=N, 4R116, 4R117,
4R119, 4R119=N
Figure
Allowable environmental conditions
see fig. 7
Temperature range for use: -10 °C to +60°C
see fig. 8
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
see fig. 9
Perspiration, urine, fresh water, salt water, acids
see fig. 10
Dust, sand, highly hygroscopic particles (e.g. talcum)
4R111=T, 4R116=T, 4R117=T, 4R119=NT, 4R119=T, 4WR95*
Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Storage and transport conditions: -10° C to +60° C, relative humid­
ity: no restrictions
Humidity: fresh water, salt water – cleaning and drying is required
after contact and use.
Allowable immersion depth: 1 m
Unallowable environmental conditions
Sauna, extreme watersports
Mechanical vibrations or impacts
Perspiration, urine, acids or bases
Dust, sand, highly hygroscopic particles (e.g. talcum)