Use And Operation - oneConcept 10029266 Handbuch

Before first Use
• Remove all packing material and accessories. Make sure all the accessories are included,
if any item is damaged or missing, contact your dealer. In addition, prepare an available
screwdriver before assembling.
• This fan must operate standing upright. Do not use it before finish assembling the base.
• Gently turn the mains body and Stand bases upside down. Insert the cord between the
front and rear base.
• Place Base assembly onto the bottom of the mains body and fasten by using screws pro-
vided.
• Turn the fan the correct way up and place it on a level and dry surface.
Operation
1. Ensure the fan is turned off before plugging into the mains socket. Place the fan on a
level and dry surface.
2. Only connect the fan to a suitable AC 240V~50Hz mains socket.
3. The fan has three speeds. To start to use, it is necessary to choose the operating time
with the selector of the timer. Press the Speed Control button to select your desired
speed. There are 3 settings – 1(low), 2(medium) and 3(high).
4. This fan is equipped with a timer, which can be set up to a maximum of 7.5 hours. The
timer counts down from the set time and will automatically turn the fan off when the
time is up.
5. The oscillation of the tower fan is handled with the Oscillation button. Press down the
Oscillation button to activate the oscillation function, and press it again to deactivate
the function.
6. When turn on the fan , the tempurature indicator will show the live tempurature.
8

Use and Operation