Step
3. Select measurement mode:
R
Axle measuring.
R
Left single wheel measurement.
R
Right single wheel measurement.
R
Left 4WD single wheel measurement.
R
Right 4WD single wheel measurement.
4. Measure out-of-roundness (optional):
R
Press brake pedal and hold steady at a
braking force greater than 500 N.
R
Press out-of-roundness button.
Robert Bosch GmbH
Manual mode (normal operation) | BSA 43xx | 49
Remote control unit
Result / Display
Announcement phase:
$
The dynamometer motors start up,
the test rollers turn.
$
The rolling resistance is measured.
Axle measuring
Left single wheel
Ready for braking force measurement.
Right single wheel
i
The measurement can be terminated at any
time with the STOP button.
+
4WD left
+
4WD right
The out-of-roundness of the brakes is measured
for 5 seconds.
The current values are displayed on the screen:
$
Out-of-roundness (~).
$
Pedal force (PD).
Out-of-roundness
button
"
Out-of-roundness measurement is over.
en
|
1 691 606 210
2015-07-29