red kiwi ES-504 C Bedienungsanleitung Seite 12

E
Your red kiwi ES-504 C lights up red whenever
you draw on it. If the LED lights up 10 times, the
battery must be recharged.
To charge the battery, gently screw it into the
round opening in the USB charger in a clock-
wise direction. Connect the USB cable either
directly to a PC or a 220 volt or 12 volt USB ad-
apter (both sold separately).
Replacement of the atomiser core: Turn the
atomiser chamber counterclockwise until you
can pull it off. Remove the old core and install
the new one on the base. Put the chamber back
over the core and turn it clockwise.
According to European legislation, dispo-
sing of electrical and electronic appliances in
household waste is prohibited. Please dispo-
se of this device at the designated collection
points for electronic waste provided by your
local council.