Operation; Setting The Gear Stage - Heidolph Hei-TORQUE series Betriebsanleitung

Operation

Setting the gear stage


Only available for Hei-TORQUE Value 400 and Hei-TORQUE Precision 400
To ensure constant speed despite fluctuations in viscosity you can choose between two
gear stages.
Speed range:
▪ Gear stage I:
▪ Gear stage II:
The gear stage can only be changed if the device is not running.
✓ Stirring is switched off.
➜ Touch the gear stage key on the
control panel.
✓ The current gear stage is displayed on
the control panel.
✓ The speed range is automatically
adjusted to the lowest speed.
Hei-TORQUE Precision 400
If you select a favorite to start a profile the gear stage will be switched
automatically.
Hei-TORQUE Precision 400
If you save more than one favorite in succession the software keeps
the gear stage of the most recent profile in memory.
Always delete the profile in the "Edit Profile" menu before editing a
profile with a different gear stage for a new favorite.
Operation
10 rpm – 400 rpm
200 rpm – 2,000 rpm
Hei-TORQUE
Value 400
25
Hei-TORQUE
Precision 400
Control key gear stage