Heidolph Hei-TORQUE series Betriebsanleitung Seite 20

Start-Up
Setting the torque limit
Fragile impellers might not withstand a load above a certain torque. This setting allows
you to limit the torque accordingly.
➜ Select the "Torque limit" menu item.
➜ Push the control knob to confirm "OFF"
or the last setting.
➜ Set the required maximum torque in
Ncm using the control knob.
➜ Push the control knob to exit setting.
➜ Push the control knob again to confirm
by pressing "OK" and save the setting.
✓ A confirmation is displayed briefly.
➜ Press "Back"
✓ If the torque limit is exceeded, the
device will shut down automatically.
The safety settings are saved and are not lost by switching off the
device.
to exit the menu.
Torque limit [Ncm]
Torque limit [Ncm]
290.5
Limit saved!
20
OFF
OK
OK