Troubleshooting - Silvercrest STGH 2000 A1 Bedienungsanleitung

Troubleshooting

Fault
The appliance is not
working.
The control lamp
goes on and off
again at frequent
intervals.
The control
lamp does not
light up.
If the malfunction cannot be corrected using one of the suggestions above, or if you have found some
other kind of malfunction, please contact our Customer Service department.
STGH 2000 A1
Cause
The plug is not connected to the mains
power.
The mains power socket is defective.
The appliance is defective.
The appliance is maintaining the tempera-
ture. To do this, the appliance has to heat
up briefly every so often. When this occurs,
the control lamp comes on.
The appliance is defective.
The appliance has heated up.
The solution
Insert the plug into a mains
power socket.
Use a different mains power
socket.
Contact Customer Services.
This is not a defect.
Contact Customer Services.
This is not a defect.
GB │ IE │ 23 ■