Storage; Troubleshooting; Disposal - Silvercrest SMWS 1000 A1 Bedienungsanleitung

Storage

■ After it has cooled down, store the cleaned appliance in a dust-free and
dry location .

Troubleshooting

Fault
The appli-
ance is not
working .
If the malfunction cannot be corrected using one of the suggestions above, or
if you have found some other kind of malfunction, please contact our Customer
Service department .

Disposal

Never dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/EU .
Dispose of the appliance via an approved disposal company or your municipal
waste facility . Please comply with all applicable regulations . Please contact your
waste disposal facility if you are in any doubt .
Your local community or municipal authorities can provide information on how
to dispose of the worn-out product .
The packaging is made from environmentally friendly material and can be
disposed of at your local recycling plant .
Dispose of the packaging in an environmentally friendly manner . Observe the
labels on the different packaging materials and separate them as needed . The
packaging material is labelled with abbreviations (a) and numbers (b) with the
following meanings: 1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
■ 12 │ GB │ IE │ NI │ CY
Cause
The mains cable 3 is not
properly connected to the
appliance .
The plug 3 is not connected
to the power supply .
The mains power socket is
defective .
The appliance is defective .
Solution
Plug the mains cable 3 correctly
into the hotplate 1 .
Insert the plug 3 into a wall
socket .
Use a different mains power
socket .
Contact the Customer Service
department .
SMWS 1000 A1