Preparing Beverages With Personal Settings - Melitta Caffeo Barista TS Bedienungsanleitung

7.3

Preparing beverages with personal settings

The preparation of beverages using the "My Coffee" function is similar for
all beverages. The preparation of a Cappuccino is described here as an
example.
Requirement: The ready symbol appears on the display and milk is
connected.
1. Place a vessel beneath the outlet.
2. Press the "My Coffee" button until the desired user is shown on the
display.
3. Press the "Cappuccino" button.
» The grinding process and coffee dispensing start.
» Coffee dispensing is ended automatically.
» Milk dispensing begins.
» Beverage dispensing is ended automatically.
4. Remove the vessel.
» The display shows: Easy Cleaning? (OK for start).
5. You can execute the Easy Cleaning programme or prepare further
beverages.
a) Execute the Easy Cleaning programme. To do so, follow the
instructions on the display. Information on this is available in
chapter 9.4 "Easy Cleaning" programme on page 92.
b) Prepare further beverages and execute the Easy Cleaning programme
later.
» The ready symbol appears on the display.
Information
ū To exit the "My Coffee" function, press the "My Coffee" button until the
ready symbol appears.
ū If a beverage is not prepared within 3 minutes, the appliance automati-
cally switches to the ready symbol.
Personal settings – "My Coffee"
83