Qlima A 34 Gebrauchsanweisung Seite 46

7.
CHANGING THE PRE-FILTER
1. Release the inlet grill by pressing on the locking latch (see diagram of Main Parts).
2. Remove the inlet grill from the unit as shown below.
3. Grasp the pre-filter on the backside of inlet grill and remove the pre-filter.
4. Insert new Pre-filter into the inlet grill.
5. Reattach the Rear Cover of the unit and securely latch into place.
6. Push and hold PRE-FILTER Control Button for 3 seconds to reset PRE-Filter Change Indi-
cator.
CLEANING EXTERNAL SURFACES
1. Turn off and unplug unit.
2. Use a washcloth slightly dampened with a little water and dishwashing soap to wipe
the outer case surfaces.
3. Do not allow water to slip into the internal parts as this could damage your unit and
result in electrical shock and injury to you.
4. Allow the unit to thoroughly dry before use.
STORAGE
If the machine will not be used for a long period of time, take the following steps:
1. Switch off the device.
2. Remove the plug from the socket.
3. Clean the machine.
4. Remove the filter package.
6. Store the device in a dust free room, preferably covered.
4
46 46