Options; Multitab Function; Energy Saver; Before First Use - Electrolux GA60LI221 Benutzerinformation

Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

5.1 Multitab function

Activate this function only when you use
the combi detergent tablets.
This function deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
Activating the multitab function
Activate or deactivate the multitab
function before the start of a pro-
gramme. You cannot activate or
deactivate this function while a
programme operates.
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode. Refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Press the multitab button, the multitab
indicator comes on.
The function stays on until you de-
activate it. Press the multitab but-
ton, the multitab indicator goes
off.
If you stop to use the combi
detergent tablets, before you start to

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
1) Duration
(min)
14
Energy
(kWh)
0.1
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.

5.2 Energy Saver

Activate or deactivate the Energy
Saver function before the start of
a programme. It is not possible to
activate or deactivate this function
while a programme operates.
This function decreases the temperature
in the drying phase. The energy con-
sumption decreases by 25%.
The dishes can be wet at the end of the
programme.
hardness in your area. If not, adjust
the water softener. Contact your local
ENGLISH 55
Water
(l)
4