Technical Specifications - Saeco Xelsis SM7786 Benutzerhandbuch

Problem
The new water filter does
not fit.
The machine is making a
noise.

Technical specifications

The manufacturer reserves the right to improve the technical specifications of the product. All the
preset quantities are approximate.
Description
Size (w x h x d)
Weight
Power cord length
Water tank
Coffee bean hopper capacity
Coffee grounds container capacity
Milk carafe capacity
Adjustable spout height
Nominal voltage - Power rating - Power supply
Cause
You did not install the
AquaClean filter during first
installation, but after having
brewed approx. 25 coffees
(based on 100ml/3oz cups). The
machine has to be completely
limescale-free before you
install the AquaClean filter.
You are trying to install another
filter than the AquaClean filter.
It is normal that your machine
makes noise during use.
The AquaClean filter was not
prepared properly and air is
now drawn into the machine.
Solution
First descale the machine and then
install a new AquaClean filter. After
descaling, the filter counter is reset to
0/8. Always confirm filter activation in
the machine menu. Also do this after
filter replacement.
Only the AquaClean filter fits into the
machine.
If the machine starts to make a different
kind of noise, clean the brew group and
lubricate it (see 'Lubricating the brew
group').
Remove the AquaClean filter from the
water tank. Shake the filter for about 5
seconds. Immerse the filter upside
down in a jug with cold water for at
least 30 seconds. Wait until no more air
bubbles come out. Place the prepared
AquaClean filter back into the water
tank. Then dispense 2-3 cups of hot
water.
Value
283 x 393 x 489 mm
10.8 - 12.2 kg
1200 mm
1.7 litres, removable
450 g
14 pucks
600 ml
75-148 mm
See data plate on inside of service door
English
21