Care And Cleaning; Troubleshooting - capital sports 10032213 Bedienungsanleitung

EN
22

CARE AND CLEANING

Note: Before cleaning, start the brake as far as possible to slow down the
rotation of running belt.
• Clean the panel with a damp cloth.
• Clean the outside of equipment with a wet sponge
• After removing the equipment, clean the floor with a vacuum cleaner
• Do not use chemicals or solvents.
• In order to ensure the equipment can be used safely, it should be inspected
every two weeks for product damage or wearing issue.

TROUBLESHOOTING

Problem Possible Cause
The screen cannot There is a problem installing
start. the wires.
Excessive internal The equipment stand not flat.
noise.
Bearing damage.
The running belt deviates
from the central position.
When exercising, The equipment's environment
the device displays is disturbed by other
the data incorrect or equipment (such as household
unreliable. appliances).
While use a chest Other signal emitters
strap, the heartbeat appeared near the equipment.
displayed wrongly.
There is a strong interference
source near the equipment.
Suggested Solution
Check connection status.
Check and adjust whether
all the feet are stable on the
floor.
Contact technical support
services.
Contact technical support
services.
Move equipment to other
places or move household
appliances.
Move the equipment to
other places to avoid overlap
with other signals (between
two devices). The minimum
distance is 80 cm).
Find the source of
interference (such as home
appliances), and move away
from interfering sources or
moving equipment.