Installing And Removing The Battery; Operation - brennenstuhl LB 3000 Bedienungsanleitung

ILLUSTRATED COMPONENTS

INSTALLING AND REMOVING THE BATTERY

The battery-operated emitter is intended for use with the following rechargeable batteries:
brennenstuhl professionalLINE rechargeable battery AB 1805
®
Bosch rechargeable battery GBA 18 V x,x Ah (up to max. 6,0Ah) Professional
Depending on the design, the battery is included in the scope of delivery
or can be purchase separately as needed.
Insert the charged battery
locks into the final position (last of the two locking positions). To remove the battery,
press the battery unlock button
of the battery compartment.
Remove the battery from the device for longer periods of disuse!

OPERATION

Setting up and switching on the emitter
Place the emitter on a dry, level surface. Only use the emitter with
the bracket . unfolded. The emitter can be set to various angles
D
using the bracket which can be set to several levels.
D
8 www.brennenstuhl.com
021117 BA_proLINE Akku SMD-LED-Strahler 28 W.indd 8
into the battery compartment
B
and pull the battery up and out
C
A Battery compartment
B Battery*
C Battery unlock button*
D Folding bracket
E On/Off button
* Illustrated or described accessories are not
included in the standard scope of delivery.
You can find all of the accessories in our
accessories range.
from above until it noticeably
A
90°
60°
30°
09.06.17 16:24