GERATEK Uppsala KS9000PA++ Bedienungsanleitung Seite 70

3. Items have dropped behind the
appliance.
1. The water pan
bottom of the cabinet) may not be
properly levelled, or the draining
spout (located underneath the top of
the compressor depot) may not be
properly positioned to direct water
into this pan, or the water spout is
blocked.
If the appliance shows a malfunction not noted on the schedule above or if
you have checked all items on the above schedule but the problem still exists,
please contact the shop you purchased the appliance at.
T
HE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL
 The refrigerant generates a sound similar to flowing water.
 Sometimes you may hear a sound which is generated by the injection process
of the cooling circuit.
 The sides of the appliance may get warm while the appliance is running.
When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
24
Depending on model
W
ATER DRIPS ON THE FLOOR
24
(located at the rear
AND DO NOT INDICATE A MALFUNCTION
C
ONDENSED WATER IN
K
NOCKING
3. Remove the items.
1. You
refrigerator away from the wall to
check the pan and spout.
D
ISTINCT NOISE
/
ON THE APPLIANCE
C
LICKING
H
UM
/
SNAPPING
70
.
may need to
.
pull the