Fossil VX43 Bedienungsanleitung Seite 8

Chronograph
JS05 / JS06 / JS15 / JS16 / JS25 / JS26 / VR32 / VR33
Time and Date Setting
1. Pull crown out to position 2.
2. Rotate crown clockwise until the previous day's date is
shown in date window.
3. Pull crown out to position 3.
4. Rotate crown clockwise until correct date is shown in
date window.
5. Continue to rotate crown to set correct AM/PM time.
NOTE: 24-hour hand moves correspondingly with hour and
minute hands. When setting time be sure to check that
24-hour hand is set properly.
6. Return crown to position 1.
NOTE: When crown is in position 2, do not press the
pushers. Otherwise the chronograph hands will move.
NOTE: Do not set the date between 9:00 PM and
1:00 AM to ensure accuracy.
Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Chronograph Zero Reset
1. If either of the chronograph hands is not at the zero (12:00)
position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move hands
counter-clockwise. Each press of A or B will move the
chronograph hands by one increment/decrement. Or press
and hold A or B for fast increment/decrement.
3. When both hands are in the zero position, reset time and
return crown to position 1.
NOTE: Chronograph minute hand will synchronize with
chronograph second hand during chronograph zero reset.
14
24-HOUR HAND
A
CHRONOGRAPH
MINUTE HAND
1 2 3
B
CHRONOGRAPH
SECOND HAND
JS05/06
24-HOUR HAND
A
CHRONOGRAPH
MINUTE HAND
1 2 3
CHRONOGRAPH
B
SECOND HAND
JS15/16/VR33
24-HOUR HAND
A
CHRONOGRAPH
MINUTE HAND
1 2 3
B
CHRONOGRAPH
SECOND HAND
JS25/26/VR32
Chronograph
VD51
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
Time and Date Setting
1. Before setting the time, make sure the chronograph second and minute hands are at the 12:00 position and the
chronograph is not running. See Chronograph Operation instructions below.
2. Pull crown out to position 2.
3. Rotate crown clockwise until the previous day's date is displayed in date window.
4. Pull crown out to position 3 when the second hand is in the 12:00 position. Second hand will stop.
5. Rotate crown clockwise until the correct date is shown in the date window.
6. Continue to rotate crown to set correct am/pm time.
7. Return crown to position 1.
NOTE: When the crown in in position 2, do not press the pushers. Otherwise the chronograph hands will move.
NOTE: Do not set date between 9:00 PM and 1:00 AM to ensure accuracy.
Chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B to reset.
Split Time
1. Press B while the chronograph is running.
2. Press B to reset.
3. Press A to finalize timing.
4. Press B to reset.
A
DATE
1 2 3
B
15