Werbung
Manual activation of heating
By pressing field no. 10, you can activate the heating of water to the set
temperature regardless of the current operating mode.
After the heating is finished the heater resumes to the preset operating mode.
Recording of the user's habits for the SMART mode
During the recording, the programme remembers your habits and uses the
measurements to heat the water in the SMART mode. The recording takes place for
7 days.
By pressing field no. 1, you can activate the recording of your habits. Field no. 1
becomes illuminated.
If you press field no. 1 while the user's habits are being recorded for the SMART
mode, the remaining number of days for recording is displayed.
During the recording, it is not possible to activate special regimes of operation of
the heater (vacation, manual activation, TIMER regime).
If a power supply failure occurs during the recording, the data becomes invalid (field
no. 1 is blinking).
When recording is finished, the illumination of field no. 1 turns off.
To exit the recording mode, hold field no. 1 for a while or restart the heater by
turning it off and then on again.
If the user's habits in terms of the consumption of hot water change, they must be
recorded again (press field no. 1: for the next 7 days, the user's habits and
behaviour will be recorded). Heating of the water in accordance with the recorded
habits can be activated by pressing field no. 3 (activation of the SMART mode).
Activation of the SMART mode
If the recording of the habits for the SMART mode is completed, it is possible to
activate the SMART mode.
By pressing field no. 3, you can activate the SMART mode. Field no. 3 becomes
illuminated.
You can exit the SMART mode by pressing field no. 3 again.
The operation of the heater in the SMART mode
Useful especially when the user's habits are relatively consistent in terms of
consumption of warm water (example: the user takes a shower every day at an
approximately same time).
The operation of the heater in the SMART mode reduces the consumption of
electric energy.
In case minor discharges were recorded, the temperature of water in the heater
remains between 40 °C and the set temperature, depending on the quantity of used
water when the user's habits were recorded.
In case major discharges were recorded, the heater heats the water to the set
temperature.
In case no discharges were recorded, the temperature of the water can be lower
than 40 °C.
When the SMART mode is deactivated, the heater heats the water to the manually
preset temperature.
22
Werbung
