LevelOne WAC-1001 Schnellstartanleitung Seite 7

System > Network Settings
Go to System > Admin webpage, you can set the controller's VLAN ID, IP address, Gateway and
other networking parameters according to your network, and then click OK button.
3.WLAN Settings
WLAN > Create a new WLAN
Go to Settings > WLAN webpage, you can setup the wireless network for APs. Click Add button
to create a new WLAN.
WLAN > RF Settings
Configure the WLAN Name, SSID and Application. The Application setting will determine
whether the WLAN is mainly used for office (general use), Voice （VoIP or other voice applications
or Guest (temporary visitors from outside). Click Next button to setup VLAN.
7