Technical Data; Items Supplied; Appliance Description; Commissioning - UNITED OFFICE UAV 150 A1 Bedienungsanleitung

• Always be attentive! Always pay attention to
what you are doing and act with common sense.
Never use the appliance when you are distracted
or don't feel well.

Technical data

Mains voltage:
Rated current :
Rated output:
Protection class:
Cutting process for
paper:
Working width:
Cutting capacity:
Collection container size:
Length min. 280 mm
Max. 410 mm
Width min. 115 mm
CO time: 2 Minutes
After 2 minutes of continuous operation, allow the
appliance to cool down for approx 60 minutes.
CO Time
The C.O. Time (Continuous Operation) details how
long an appliance may be used without the motor
overheating and being damaged. When the specified
C.O. Time has been reached, the appliance must
be stopped until the motor has cooled itself down,
for ca. 60 minutes.

Items supplied

Strip Cut Shredder
Operating instructions
220-240 V ~
50 Hz
0,7 A
150 W
II
Strip cut
security level 2
217 mm
2
5 Sheets (80g/m )

Appliance description

1 Switch
2 Cutter opening
3 Power cable
4 Telescope arm

Commissioning

• Place the Strip Cut Shredder attachment onto
a suitable container:
First place the broad end of the appliance on the
edge of the container. Then pull the telescope
arm 4 out sufficiently to ensure that this also
sits securely on the edge of the container.
• Insert the plug into a mains power socket.

Operation

You can shred up to 5 sheets (80g/m
at the same time.
Warning:
Remove all staples and paper clips before feeding
paper into the cutter opening 2. Otherwise the ap-
pliance could be damaged.
Warning:
Never use the appliance for more than 2 minutes!
Allow the appliance to cool down completely be-
fore continuing to use it. Otherwise the appliance
could be irreparably damaged!
- 3 -
2
-Paper)