Blowing; Cleaning/Maintenance; Cleaning The Appliance; Cleaning & Maintenance - Parkside PNTSA 20-Li A1 Originalbetriebsanleitung

Blowing

Operation without the use of a ilter
is recommended.
To blow, plug the suction hose (12) onto
the connection (9) on the motor head.

Cleaning/Maintenance

Cleaning the appliance

Never hose the appliance down
with water. Never use aggressive
cleaning agents or solvents. This
could damage the appliance.
• After use, empty the waste tank (
• Clean the waste tank with a damp cloth.
• Replace the paper ilter bag (
when full (see "Replacement parts/Ac-
cessories" for reordering).
• Tap the folded ilter and clean it with a
brush or hand-brush.
Maintenance
• The equipment is maintenance free.

Storage

- Insert the separated vacuum tubes (10)
into the accessory holder (24).
- Wind the vacuum hose (12) around
the device and plug the handle section
(11) into a vacuum tube (10).
- Store the appliance in a dry place and
out of reach of children.
- You can suspend the device from the
wall bracket (
bracket hook (
19)
13) using the wall
7).
Do not suspend the device
from the wall bracket when
fully loaded (e.g. full with
water).
- To suspend from the wall, attach the
wall bracket
13) to the wall using the two screws
(
14) and dowels. Ensure that the
(
wall bracket (
right away after mounting and on a re-
gular basis thereafter.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to ind these or consult an in-
6). stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
ire. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have inished with them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on for
recycling. Contact our Service Centre for
more details.
Defective units returned to us will be dis-
posed of for free.
GB MT
13) is irmly attached
29