Transport, Handling, Storage; Transporting And Handling The Packed Machine; Packing And Unpacking - Blitz Monsun Fast Serie Betriebsanleitung

3

Transport, Handling, Storage

3.1

Transporting and handling the packed machine

Before moving the machine ensure that the load-bearing capacity of the forklift truck is sufficient to
take the weight to be lifted.
Position the forks exclusively as illustrated below. Once the forks have been positioned in the
points indicated, lift slowly without jerking.
3.2

Packing and unpacking

To avoid damages and to protect the compressor during transport it is usually placed on a wooden
pallet, to which it is secured by screws and covered with cardboard.
All the shipping and handling information and symbols are printed on the compressor packing.
Upon consignment remove the top part of the packing and check if any damages have been
encountered during transport. If any damages are found, caused during transport, immediately
make a written claim, backed up with photos of the damaged parts if possible and forward
everything to your insurance company, with copy to the Manufacturer and transporter.
In order to use the compressor in complete safety read the safety standards
given in section 1.3. before reading this section.
The packed compressor must be transported by qualified personnel using a
forklift truck.
Never stand near the area where the compressor is being handled and never
stand on the crate while it is being moved.
63
GB