Components; Correct Use - Meister FW260M Originalbetriebsanleitung

If your hands experience an unpleasant
sensation or the skin changes colour
whilst you are using the machine, stop
using the machine immediately. Take
sufficient breaks. If you do not take suffi-
cient breaks, this may cause a hand-arm
vibration syndrome.
An estimate of the level of load in con-
junction with the work or use of the
machine should be carried out and
breaks set out accordingly. This method
can be used to considerably minimise
the level of load during the entire work-
ing time. Minimise risks, which expose
you to vibrations.
Take care of your machinery in accord-
ance with the directions in the operating
instructions. If the machine is to be used
frequently, contact your dealer and pro-
cure anti-vibration equipment (handles) if
necessary. Avoid using the tool at tem-
peratures of t = 10 °C or lower. Draw up
a working schedule, which can be used
to minimise vibration loads.
WARNING: A certain amount of noise is
unavoidable when using this device.
Ensure you carry out noise-intensive work
only during permitted times. Maintain the
quiet periods and limit your work to the
absolute minimum. For the sake of your
personal protection and the protection of
persons in close proximity, suitable hear-
ing protection should be worn.
3 – Components
1 On/Off switch
2 Tool holder
3 Saw tool
4 Scraping tool
5 Holding screw with washer
6 Adjustment key
7 Sandpaper
8 Triangular sander adapter
5410360-Multifunkt_man.indd 39
4 – Correct use
Application range
The electrical tool is designed to saw
and separate wooden materials, plastic,
gypsum, non-ferrous metals and secur-
ing elements (e.g. nails, staples). It is
likewise suitable for processing soft wall
tiles as well as for dry grinding and
scraping small areas. It is particularly
suitable for jobs, which are flush to
edges and flush with the surface.
Only accessories suitable for the tasks
listed above may be used.
Improper use of the product
All uses of the device that are not named
in the "Intended use" chapter or that are
carried out using unsuitable accessories
are considered improper use.
The grinding machine is not a polishing
machine. It is not suitable for polishing
cars or metal surfaces.
There is a risk of injury!
The user of the device is liable for all
property damage and personal injuries
occurring as the result of incorrect use.
The manufacturer warranty is voided if
other components or non-original com-
ponents are used with the machine.
Residual risks
Some residual risks do still remain,
despite the specific safety measures list-
ed in the operating instructions, safety
notes and additional safety regulations,
for example, unintentional operation of
the product. If the directions in your
operating instructions are not observed,
incorrect use may result in other residual
risks.
39
12.06.19 07:10