Components; Correct Use - Meister PS600M Originalbetriebsanleitung

5403120-Pendelhub_man 11.12.14 10:24 Seite 32
Information about minimising
vibrations
Warning: The actual vibration emission
value present during the use of the
machine may deviate from the
specification given in the operating
instructions or made by the
manufacturer. This may be caused by
the following influencing factors that
should be taken into account prior to
and during each use:
• Is the device being used correctly?
• Is the correct type of material being
processed?
• Is the device in proper working order?
• Are the handles or optional vibration
handles mounted and fixed securely
up against the body of the machine?
If your hands experience an unpleasant
sensation or the skin changes colour
while you are using the machine,
immediately discontinue your work. Take
sufficient breaks. If you do not take
sufficient breaks, this may cause a
hand/arm vibration syndrome.
You should estimate the level of load
caused in conjunction with the work or
use of the machine and take the
appropriate breaks. This method can be
used to considerably minimise the level
of load during the entire working time.
Minimise risks in which you are exposed
to vibrations. Take care of your
machinery in accordance with the
directions in the operation instructions.
If the machine is to be used frequently,
contact your dealer and arrange anti-
vibration equipment (handles) if
necessary.
32
Avoid using the tool in temperatures of
t = 10 °C or lower. Draw up a working
schedule which can be used to
minimise vibration loads.
Warning: A certain amount of noise is
unavoidable when using this device.
Ensure you carry out noise-intensive
work during permitted times. Maintain
the quiet periods and limit your work to
the absolute minimum. For the sake of
your personal protection and the
protection of persons in the vicinity,
suitable ear defenders should be worn.
3 – Components
1 ON/OFF switch
2 Lock knop
3 Cable
4 Connection for dust exhaustion
5 Footplate
6 Cutting angle adjustment
7 Oscillation
8 Guide roller
9 Saw blade holder
10 Blade guard
11 Adjusting key
12 Hoover adaptor
4 – Correct use
Subject to the specified cutting rates
and when appropriate accessories are
used (Heed manufacturer's data), this
jigsaw is suitable for sawing wood,
metal, ceramics and panels of plastic or
mineral fibre. All other applications are
expressly ruled out.
The machine is intended only for use in
the household.
This unit may not be used by people
(including children) with reduced