Connection Of The Audio Source (Bluetooth ® ); Requirements Of The Source Devices - Teuco CHEERS CH3 Betriebsanleitung

EN
CONNECTION OF THE AUDIO SOURCE (BLUETOOTH ® )
Follow these steps to carry out the Bluetooth ® audio connection
between the amplifier and an audio source equipped with a
Bluetooth ® A2DP transmission signal:
• Switch on the amplifier (with the loudspeakers connected).
Switch on the source device and activate the Bluetooth ®
•
function.
• If a connection confirmation is requested, digit the pairing
code: 0000.
• Play an audio track via the player of the source device.
In the case of source devices such as mobile phones, it is
necessary to carry out the synchronisation of the Bluetooth ®
devices utilising the device research function.
For further information, refer to the instruction manual of your
telephone.

REQUIREMENTS OF THE SOURCE DEVICES

To function correctly with the amplifier, the source device must
have the following characteristics:
Communication protocol: Bluetooth ® 2.1 or previous.
•
• Profiles: A2DP, AVRCP.
• Band frequency: 2.4 GHz.
• Range: Class 2 - 10m.
• Audio volume control.
10
®
hi-fi