C - Installation; Connection From The Intercom Panel And The Monitor; Cable Length - avidsen 112263 Bedienungsanleitung

C - INSTALLATION

1 - CONNECTION FROM THE INTERCOM PANEL AND THE MONITOR

• Do not increase the number of connectors on the connecting wire between the intercom panel and the
monitor.
• Keep the connecting wire between the intercom panel and the monitor more than 1m away from any
electromagnetic interference (230 V cable, WiFi equipment, microwave ovens, etc.)
• Between the monitor and the intercom panel(25m maximum)

Cable length

0 to 25m
• Between the intercom panel and a strike plate (50 m maximum)
Cable length
From 0m to 50m
• Cabling for the video intercom system with use of an electric strike plate (not included and optional)
(red, black)
* Electric strike plate and additional adaptor not provided. The type of secondary adaptor to be used depends
on the type of strike plate that you wish to install; the strike plate must not exceed an operating intensity of
2A and a voltage of 30V.
• Cabling for the video intercom system for use with an automatic gate opening mechanism with an NO dry
contact type entry command (optional)
2 wires
(red, black)
8
EN
2 wires
COLOUR VIDEO INTERCOM
Section to use
0.75mm²
Section to use
0.75mm²
4 wires (red, black, white, yellow)
4 wires (red, black, white, yellow)