HP Deskjet F4500 All-in-One Serie Kurzanleitung Seite 63

Network troubleshooting
3
: Check for and resolve the following possible conditions:
• Your computer may not be connected to your network. Make sure that the computer is connected to the
same network to which the HP Deskjet is connected. If you are connected wirelessly, for example, it is
possible that your computer is connected to a neighbor's network by mistake.
• Your computer may be connected to a Virtual Private Network (VPN). Temporarily disable the VPN before
proceeding with the installation. Being connected to a VPN is like being on a different network; you will
need to disconnect the VPN to access the product over the home network.
• Security software may be blocking communication. Security software (firewall, anti-virus, anti-spyware)
installed on your computer may be blocking communication between the product and the computer. An
HP diagnostic runs automatically during installation and can provide messaging about what may be
blocked by the firewall. Try temporarily disabling your firewall, anti-virus, or anti-spyware applications to
see if you can successfully finish the installation.
You can re-enable your firewall application after installation is complete. Make sure the following files
are included in the exceptions list of the firewall:
• C:\Program Files\Hp\Digital Imaging\bin\hpqtra08.exe.
• C:\Program Files\Hp\Digital Imaging\bin\hpiscnapp.exe.
• C:\Program Files\Hp\Digital Imaging\bin\hpqdstcp.exe.
• C:\Program Files\Hp\Digital Imaging\bin\hpqkygrp.exe.
• C:\Program Files\Hp\Digital Imaging\bin\hpqste08.exe.
• C:\Windows\System32\hpzinw12.exe.
• C:\Windows\System32\hpzipm12.exe.
Tip: Configure your firewall software to allow communication over UDP port 427.
4
: Use the advanced search feature.
1. Press and hold the Scan button to initiate the wireless test and print the network configuration page.
2. Identify the IP address of the HP Deskjet from the network configuration report. Check to make sure
that the Product IP address is in the same range as the PC and router.
3. Use the advanced search option available during software installation, then click on Search by IP
address and enter the product's IP address.
Windows only
Other network problems after software installation
If the HP Deskjet has been successfully installed, and you are experiencing problems such as not being able
to print, try the following:
• Turn off the router, product, and computer, and then turn them back on in this order: router first, then the
product, and finally the computer. Sometimes, cycling the power will recover a network communication
issue.
• If the previous step does not solve the problem and you have successfully installed the HP Photosmart
Software on your computer, run the Network Diagnostic tool.
To run the Network Diagnostic tool
> In the Solution Center, click Settings, click Other Settings, and then click Network Toolbox. On the
Utilities tab, click Run Network Diagnostics.
63