Specification - ZTE BLADE V8 LITE Schnellstartanleitung

Only use approved accessories.
Don't rely on your phone as a
primary device for emergency
communications.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits
for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known
as Specific Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and the highest
SAR value for this device when tested at the
head was 0.333 W/kg*, and when tested at the
body was 1.229 W/kg* with 5 mm distance.
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses
the minimum power required to communicate
with the network.
* The tests are carried out in accordance with
EN 50360, EN 50566, EN 62479, EN 62209-1
and EN 62209-2.
10

Specification

GSM B2/B3/B5/B8
WCDMA Band B1/B5/B8
FDD LTE B1/B3/B5/B7/B8/B20
EUT
802.11b/g/n
supports
Bluetooth V4.1
Radios
GPS
application
WCDMA Version Rel.8
LTE Version Rel.10
GSM850:33dBm
GSM900:33dBm
GSM1800:30dBm
GSM1900:30dBm
WCDMA Band 1:23.2dBm
WCDMA Band 5:23.2dBm
WCDMA Band 8:23.1dBm
FDD LTE Band1(FULL RB):22dBm
Maximum
FDD LTE Band3(FULL RB): 22dBm
RF Output
FDD LTE Band5(FULL RB): 22dBm
Power
FDD LTE Band7(FULL RB): 22dBm
FDD LTE Band8(FULL RB): 22dBm
FDD LTE Band20(FULL RB):
22dBm
802.11b/g/n: 15.3dBm
Bluetooth EDR:7.2dBm
Bluetooth LE:0.5dBm
GPS(RX Only)
NOTE:
This device do not support CA.
11