Eldes PITBULL ALARM PRO Bedienungsanleitung Seite 4

Components of PITBULL ALARM PRO and PITBULL ALARM PRO-3G
5
1
4
holder for fixing on the wall
1. PITBULL ALARM PRO
2. Lens for movement detector
3. Power supply socket
4. AC/DC power supply
5. Power supply connection lead
6. Reset button to restore default parameters
7. Holder to fix the unit in place
8. Mini-USB connector to allow programming via your PC
9. Slots for nano-SIM cards (primary slot is positioned above
the secondary one). ATTENTION! secondary slot is NOT
available for the device model PITBULL ALARM PRO-3G!
10. GSM module
11. Back-up battery in case of mains power supply failure
Connector Description
BeLL- / COM Siren output negative terminal / output terminal / common return terminal
Z2 Security zone terminal
BeLL+ Siren output positive terminal
4 4 EN
PITBULL ALARM PRO
INSIDE VIEW
16
12
10
GSM
9
3
12
11
2
8
PITBULL ALARM PRO
BACK SIDE
19
13
BELL+ Z2 BELL-/COM
18
14
PITBULL ALARM PRO -3G
INSIDE VIEW
16
12
10
GSM
9
13 12
11
14
8
6
PITBULL ALARM PRO -3G
BACK SIDE
3
17
13
BELL+ Z2 BELL-/COM
15
18
8
12. Motion detector to sense possible intruders
13. TAMPeR button to alert you if anyone interferes with the
unit
14. Microphone to allow you to listen in to an incident using
your mobile phone (NOT available for the device model
PITBULL ALARM PRO-3G )
15. Wired zone for wired sensor and output for siren or indica-
tor connection
16. Built-in GSM antenna
17. Fuse F1 model - MInISMDC050F 0.5A
18. Fuse F2 model - MInISMDC020F 0.2A
19. LeD indicator
13
6
3
17
7
BELL+ Z2 BELL-/COM
15
8
PITBULL ALARM PRO V1.1