Using A Chargepak; About Chargepaks; Inserting A Chargepak - PURE Avalon N5 Bedienungsanleitung

To check the current software version:
1. Press .
2. Press the < or > buttons to scroll and press the Select button to choose 'SETTINGS'.
3. Press the < or > buttons to scroll and press the Select button to choose 'VERSION'.
To update the software:
1. Use a Micro USB cable to connect your Avalon N5 to your computer.
2. Follow the instructions provided with the software update file.

Using a ChargePAK

About ChargePAKs

A ChargePAK is a rechargeable battery pack (available separately) that allows you to listen to your music
anywhere. When your Avalon N5 is connected to a power outlet, it charges the ChargePAK. You can
then disconnect your Avalon N5 from the power and take your music with you.

Inserting a ChargePAK

Note: Your Avalon N5 is only compatible with a Pure ChargePAK F1. Do not use any other batteries or
ChargePAK models with your Avalon N5.
To insert a ChargePAK:
1. Switch your Avalon N5 off and disconnect it from the power supply.
2. At the base of your Avalon N5, use a coin to undo the screw on the battery cover to remove it.
3. Insert the ChargePAK into the battery compartment, with the electrical contacts on the ChargePAK
facing down and the Pure label facing away from the front of the radio.
4. Replace the battery cover.
5. Connect your Avalon N5 to the power supply.
The ChargePAK starts charging. If the ChargePAK is new or has not been used for a long time, we
recommend you charge it for at least 24 hours.
Note: When the ChargePAK is charging, it is normal for it to get warm. The efficiency of the
ChargePAK will decrease over time.
EN
17