Right Angle Mating Connector M12; Technical Data - Siko WV58MR Originalmontageanleitung

WV58MR

Technical data

7.2 Right angle mating connector M12

Advice
NOTICE
` Strand cross-section of screened lines min. 0.14 mm²; max. 0.75 mm²
• Accessory SIKO art. no. "83006" (socket contact 5 pin).
Mounting
1. Slide the pressure nut and housing along the cable.
2. Strip the cable, shorten the screen.
3. Strip wires and connect.
4. Screw housing with insert.
5. Tighten pressure nut.
Fig. 3: Right anlge mating connector M12
Changing the angle position
1. Turn on insert, slightly pull out and rotate to desired angular position
2. Screw on insert.
8 Technical data
Mechanical data
Shaft
Flange
Housing
Speed
Moment of inertia
Starting torque
WV58MR · Date 29.05.2019 · Art. No. 88752 · Mod. status 130/19
/ cable feed-through: ø4-ø8 mm.
(Fig. 3)
(in steps of 45°).
stainless steel
aluminium
die-cast aluminium
≤6000 rpm
≤3000 rpm
≤8 gcm
2
≤2 Ncm
(Fig. 3)
Additional information
KTL coated
IP65
IP67
at 20 °C
English 23