Herunterladen Inhalt Inhalt Diese Seite drucken

Messner eco-X 4500 Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Assembly (see fi g. 5 - 9)
1.
Push the O-ring (16) onto the starting point on the motor housing (10).
2.
Carefully slide the rotor assembly (15) into the motor housing (10) and
twist the bearing cover so that the two holes fi t onto the pins on the
motor housing (10).
3.
Check whether the rotor assembly can be rotated easily.
4.
Check the position of the O-ring (16) on the motor housing (10).
5.
Put the pump housing (12) on the motor housing (10) and attach it
fi rmly and evenly with the 4 screws (18).
6.
Put the pump (10) into the lower shell (2) in the desired position (the
out let of the pump housing (12) directed upwards or sidewards).
7.
Attach the upper shell (1) to the rear hook of the lower shell (2) and
lock it into the front fl aps.
8.
Insert the respective screen inserts into the openings on top (3 or 4)
and on the left (5 or 6) or on the front (8) and on the right (7).
Maintenance
In order to prolong the service life of your pump signifi cantly and to keep it
in sound operating condition, it is recommended to carry out maintenance
and cleanup regularly.
This can be done by everyone, quickly and easily. See „Dismantling/
Assembly"
Servicing intervals
- In the beginning check proper performance of your pump every day.
If necessary, clean the fi lters.
- Since servicing intervals (complete cleaning) will vary depending on the
level of pond pollution, repeat the periodic service to your pump in
accordance with the pollution of the pond water .
Should you determine that there are damaged or worn parts, replace
them. See „Spare parts"
Important! When used in calcareous water, the rotor assembly (15)
and the stainless steel can split tube in the motor housing (10) should
be cleaned at regular intervals.
Pump care in wintertime
Protect your pump from freezing-up!
Take the pump out of your pond in autumn.
Clean the pump completely according to the instructions.
During the winter months store the pump in a tank fi lled with water to
prevent the bearings from drying out.
Store the tank in a frostproof room.
Spare parts
To order spare parts, please indicate the pump type, the designation
and the Art.-No. from the table below (see also fi g. 9).
Item Designation
Pump Type
1
Upper shell
eco-X 4500 - 20000
eco-X plus 10000 - 20000
2
Lower shell
eco-X 4500 - 20000
eco-X plus 10000 - 20000
3
Top screen insert
eco-X 4500 - 20000
eco-X plus 10000 - 20000
4
Top screen insert
eco-X 4500, eco-X 7500
1 1/4˝
Top screen insert
eco-X 10000, eco-X 13000
1 1/2˝
eco-X 16000, eco-X plus 10000
Top screen insert 2˝ eco-X 20000
eco-X plus 15000, eco-X plus 20000
5
Left screen insert
eco-X 4500 - 20000
eco-X plus 10000 - 20000
6
Left screen insert
eco-X 4500, eco-X 7500
1 1/4˝
Left screen insert
eco-X 10000, eco-X 13000
1 1/2˝
eco-X 16000, eco-X plus 10000
Left screen insert 2˝ eco-X 20000
eco-X plus 15000, eco-X plus 20000
10
Art.-No.
Number
104/003438
1
104/003439
1
104/003441
1
104/003451
1
104/003450
1
104/003449
1
104/003442
1
104/003448
1
104/003447
1
104/003446
1
Item Designation
Pump Type
7
Right screen insert
eco-X 4500 - 20000
eco-X plus 10000 - 20000
8
Front screen insert
eco-X 4500 - 20000
eco-X plus 10000 - 20000
9
Handle
eco-X 4500 - 20000
eco-X plus 10000 - 20000
11
Socket 1 1/4˝
eco-X 4500, eco-X 7500
Socket 1 1/2˝
eco-X 10000, eco-X 13000
eco-X 16000, eco-X plus 10000
Socket 2˝
eco-X 20000
eco-X plus 15000, eco-X plus 20000
14
Rubber lagging C3
eco-X 4500 - 20000
eco-X plus 10000 - 20000
12
Pump housing 1 1/4˝ eco-X 4500, eco-X 7500
Pump housing 1 1/2˝ eco-X 10000, eco-X 13000
eco-X 16000
Pump housing
eco-X plus 10000
1 1/2˝ - Ø 35
Pump housing 2˝
eco-X 20000
Pump housing
eco-X plus 15000
2˝ - Ø 45
eco-X plus 20000
13
Connection fl ange
eco-X 20000
C3 2˝
eco-X plus 15000, eco-X plus 20000
15
Rotor assembly
eco-X 4500
Rotor assembly
eco-X 7500
Rotor assembly
eco-X 10000
Rotor assembly
eco-X 13000
Rotor assembly
eco-X 16000
Rotor assembly
eco-X 20000
Rotor assembly
eco-X plus 10000
Rotor assembly
eco-X plus 15000
Rotor assembly
eco-X plus 20000
16
O-ring 96 x 3
eco-X 4500 - 20000
eco-X plus 10000 - 20000
17
O-ring 105 x 3
eco-X 20000
eco-X plus 15000, eco-X plus 20000
18
Screw M 6 x 16
eco-X 4500 - 16000
eco-X plus 10000
Screw M 6 x 20
eco-X 20000
eco-X plus 15000, eco-X plus 20000
19
Screw Ø 3,5 x 13
eco-X 20000
eco-X plus 15000, eco-X plus 20000
Waste disposal
waste disposal of electronic devices by the user in private households
of the EU
It is not allowed to dispose the product along with the regular waste
disposal, instead it has to be collected separately. It is your
responsibility to dispose and recycle the device in a proper place and
protect the environment through this. More information, where to
dispose your devices can be obtained at the local departments.
11
Art.-No.
Number
104/003443
1
104/003440
1
104/003444
1
104/002641
1
104/001967
1
104/003425
1
104/003452
3
104/003279
1
104/003280
1
104/003570
1
104/003409
1
104/003508
1
104/003410
1
168/009128
1
168/009129
1
168/009130
1
168/009131
1
168/009132
1
168/009133
1
168/009134
1
168/009135
1
168/009136
1
112/000030
1
112/000047
1
114/000048
4
114/000079
4
114/000078
2

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis