Factory Reset - Teac CR-H258i Bedienungsanleitung

3 Press the ENTER button.
Autotune...
The unit scans for new channels and adds the channels
found to the channel list.

Factory reset

You can initialize the settings of the Function Control.
1 While listening to a DAB broadcast press the
MENU button.
2 Turn the MULTI JOG knob until "Factory reset" is
displayed on the second line of the display.
or SELECT
Factory reset
3 Press the ENTER button.
4 Turn the MULTI JOG knob to display "Yes" on the
second line of the display.
0
5 Press the ENTER button.
All data of the Function Control is erased, and it returns
to the factory settings.
After resetting use Auto tune to find new channels
(see page 36).
> If you change the source or turn off the unit
without auto tuning, the unit will start auto tuning
automatically the next time DAB is selected as the
source.
No
Yes
TEAC CR-H258i
37