Listening To An External Source; Setting Up Your Dab Tuner - Teac CR-H258i Bedienungsanleitung

Listening to an External Source

You can listen to the sound from an external component
connected to the AUX 1 IN or AUX 2 IN jacks.
1 Press the SOURCE button repeatedly to select
"AUX1 IN" or "AUX2 IN".
2 Start playback on the external component.
3 Adjust the volume.
Turn the VOLUME knob to adjust the volume.
32
1 3

Setting up your DAB Tuner

The first time you listen to the DAB radio, it will scan for
DAB channels and build a channel list.
Press the SOURCE button repeatedly to select
"DAB".
The unit will scan for broadcast services in the local
area and add them to the channel list as they are
found. The scan should take about 10 seconds.
TEAC CR-H258i
As channels are added to the channel list the number
of channels found is displayed.
After broadcast services have been found the channels
are listed in alphanumeric order.
< If no broadcast services are found, please check that
the antenna is correctly connected to the unit.
SOURCE