Constant Light Control - ABB Busch-Wächter GJ B000 6132 A0156 Betriebsanleitung

Mode of Operation
b. Switch Value Cyclic HKL Signal/2:
c. Switch Value Cyclic HKL/1:
d. Switch Value Cyclic HKL
Indication Constant Light/1:
All applications can be run on the unit combinations 6131-xxx-102-500/6120 U-102 (EM/A 2.x,
BA/U 3.2) and ... /6110 U10 1(SA/U 1.2). Only the combinations 6131-xxx-102-500 /
6920 U-102 (PM/A 2.x, BA/U 3.2) and 6931 U-101 without constant light control are available
for Powernet® EIB.

5.7 Constant Light Control

If the Presence Detector is employed as a constant light controller, use the parameter
setting under the "Constant Light" tab in the ETS application. By means of the communi-
cation object "Set reference value", the currently set brightness value can be accepted via
the 1-bit instruction (switch). For more precise details regarding possible settings of the
Presence Detector, please refer to the "Twisted Pair" (TP) Technical Manual and/or the"
Constant Light Control" Manual.
This application comprises the functions
2 x "Presence" and "Signal
This application comprises the functions
2 x "Presence" and "HKL"
This application comprises the functions
"Presence", "HKL", "Indication" and "Constant
Light Control "
GB
"
66