HP Designjet T1120 SD-MFP Kurzübersicht Seite 18

The list offers different methods you can use to determine the Scan Area size:
●
Auto: The program will automatically detect the size of the full document
loaded in the scanner. You can use the preview to check that the scanner has
detected the size correctly.
●
Use a standard or custom size: The dialog contains a list of standard sizes
and custom sizes saved on the system. Scroll through the list and select the
size you want to use. To create a new custom size, follow the instructions
below.
●
Set size values for width and length: Press the More button
expand the Scan Area dialog. Make your width and length size settings in the
fields or set Auto on width or length separately. You can save your changes
to create a new custom size or use them for the current job only.
NOTE: You can also set the Scan Area visually on the screen through a preview.
See Preview copies and scans on page
Set the Resize value (output size) for Copy only
1. Press the Resize button.
2. Select No if you do not want to resize the image: that is, you want the end
result to be the same size as the Scan Area.
3. Press the Size button to select a standard size (such as A2 or A4) from a list.
4. Select Scale to resize according to a scale factor (such as 50% or 32%).
14 Chapter 2 Basic operations
15.
to
ENWW