Cord Management
Secure cables to top or bottom of wall mount arm (A)
5
using cable ties (e) as shown.
Arm Tension Adjustment
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen
to fall.
If more or less tension is desired in the arm pivot
6
points, do the following:
• To increase tension, turn tension screw(s)
clockwise with 3/16" allen wrench.
• To reduce tension, turn tension screw(s) counter-
clockwise with 3/16" allen wrench.
NoTe: Do not turn more than half a turn.
WARNING
e
A
e
COrD
TeNSION SCrewS