Menu Operation; Basic Menu Operation; Menu List - Sony ODS-series Benutzerhandbuch

Menu Operation

Configure basic settings of the unit and display the unit's
status using the menu displayed on the front panel of the
unit. Use the buttons on the front panel to operate the
menu.

Basic Menu Operation

This section describes basic menu operations, using the
warning tone setting as an example.
1
Press the MENU button.
The menu selection screen appears.
2
Move the cursor (>) using the J and j buttons and
select [Setup], and then press the ENTER button.
The submenu of the selected item appears.
3
Use the J and j buttons to select [Control Panel], and
press the ENTER button.
The submenu of the selected item appears.
4
Use the J and j buttons to select [Buzzer], and press
the ENTER button.
The current setting of the selected item appears. The
asterisk (*) indicates the current setting.
5
Press the ENTER button.
The cursor (>) appears, indicating that the setting can
be changed.
6
Use the J and j buttons to move the cursor (>).
Control Panel
7
Press the ENTER button to confirm the setting.
The cursor disappears, and the setting is confirmed.
8
Press the MENU button to return to the menu selection
screen (step 1).
Pressing the BACK button returns to the immediately
preceding screen.
9
Press the MENU button again to end menu operation.

Menu List

Menu Description
Information Displays the current values of
each setting in the [Setup] menu
and the following IPv6
parameters.
IPv6 Temporary: Displays the
IPv6 Link-Local: Displays the
Setup Allows you to configure the unit's
settings.
IPv6 temporary address.
IPv6 link-local address.
Menu Operation
55