Network Name; Bluetooth - Yamaha R-N602 Bedienungsanleitung

Configuring various functions (Setup menu)

■ Network Name

Edits the network name (the unit's name on the network)
displayed on other network devices.
1
Select "Network Name".
NETWORK
Network Name
2
Press ENTER twice to enter the name edit
display.
NAME
R-N602 XXXXXX
3
Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a character.
NAME
R-N602 XXXXXX
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
4
To confirm the new name, press ENTER.
5
To exit from the menu, press SETUP.
■ Update (Network Update)
Updates the firmware via the network.
Starts the process to update the unit's firmware.
Perform
For details, see "Updating the unit's firmware via
Update
the network" (p. 50).
Displays the version of the firmware installed on
Version
the unit.
Displays the system ID number.
ID
46
En

Bluetooth

Configures the Bluetooth settings.
■ On/Off
Enables/disables the Bluetooth function (p. 28).
A
Off
On (Default)
■ Standby (Bluetooth Standby)
Selects whether to enable/disable the function that turns
on the unit from Bluetooth devices (Bluetooth standby). If
A
this function is set to "On", the unit automatically turns on
when a connect operation is performed on the Bluetooth
device.
Off
On (Default)
A
y
This setting is not available when "Standby (Network Standby)"
(p. 45) is set to "Off".
■ Audio Receive
Receives audio settings from the Bluetooth device.
Disconnect
■ Audio Send
Transmit audio from the unit to Bluetooth speakers or
headphones.
Off (Default)
On
Disables the Bluetooth function.
Enables the Bluetooth function. Immediately
after selecting the "On", output of the network
source is paused.
Disables the Bluetooth standby function.
Enables the Bluetooth standby function. (The
unit consumes more power than when "Off" is
selected.)
Disconnects the connected Bluetooth device. To
disconnect the Bluetooth device, press ENTER
on the remote control.
Audio can not be transmitted.
Enables audio transmission. Specify the audio
transmission settings using the dedicated
MusicCast CONTROLLER app for mobile
devices.