Basic Operation; Playback; Playing A Source - Yamaha R-N602 Bedienungsanleitung

BASIC OPERATION

Playing a source

A (power)
DIMMER DISPLAY MODE MEMORY
INPUT BASS TREBLE
PHONES SPEAKERS
A B
5V 1A
SPEAKERS A/B
INPUT selector
SPEAKERS
SPEAKERS A/B
A
PHONO
COAX 1 COAX 2
OPT 1
LINE 1
TUNER
BAND
HOME
SETUP
VOLUME
NOW PLAYING
1
Press A (power) to turn on this unit.
2
Rotate the INPUT selector on the front panel
(or press one of the input selection keys on
the remote control) to select the input source
you want to listen to.
3
Press SPEAKERS A and/or SPEAKERS B on
the front panel or on the remote control to
select speakers A and/or speakers B.
When speaker set A or speaker set B are turned on,
"A" or "B" is displayed on the front display
accordingly (p. 7).
Notes
• When one set of speakers is connected using bi-wire connections,
or when using two sets of speakers simultaneously (A and B),
make sure "A" and "B" are displayed on the front display.
• When listening with headphones, turn off the speakers.

Playback

PURE DIRECT
CLEAR BAND PRESET TUNING
VOLUME
BALANCE LOUDNESS SELECT
PUSH - ENTER
FLAT
-30dB
RETURN
CONNECT
L R
VOLUME control
A (power)
B
SLEEP
BLUETOOTH
OPT 2 CD
Input selection
keys
LINE 2 LINE 3
NET USB
TUNING
RETURN
OPTION
VOLUME
MUTE
4
Play the source.
5
Rotate the VOLUME control on the front
panel (or press VOLUME +/– on the remote
control) to adjust the sound output level.
y
You can adjust the tonal quality by using the BASS, TREBLE,
BALANCE and LOUDNESS controls or the PURE DIRECT
switch on the front panel.
6
When you finish using, press A (Power) on
the front panel to turn off the power.
When you press A (Power) on the remote control,
this unit set to standby mode.
■ Enjoying pure high fidelity sound
(Pure Direct)
When the PURE DIRECT switch is turned on, routes
input signals from your audio sources so that the input
signals bypass the BASS, TREBLE, BALANCE and
LOUDNESS controls, thus eliminating any alterations to
the audio signals and creating the purest possible sound.
The PURE DIRECT indicator lights up and the front
display turns off after a few seconds.
DIMMER DISPLAY MODE MEMORY
INPUT BASS TREBLE
PHONES SPEAKERS
A B
5V 1A
Notes
• When the PURE DIRECT switch is turned on, the front display
turns off.
• The BASS, TREBLE, BALANCE, and LOUDNESS controls do
not function while the PURE DIRECT switch is turned on.
PURE DIRECT switch
PURE DIRECT
CLEAR BAND PRESET TUNING
VOLUME
BALANCE LOUDNESS SELECT
FLAT PUSH - ENTER
-30dB
RETURN
CONNECT
L R
21
En