Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE:
Remove the protection caps from the Transmission interfaces and from the
cable plug.
Transmission|Tx:
Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to theTransmission|Rx interface of the
user module or to one of the Dynamic Ports of a compatible matrix (see page 5).
Transmission|Rx:
Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Transmission|Tx interface of the
user module or to one of the Dynamic Ports of a compatible matrix (see page 5).
Establishing the power supply
USB 2.0 Trans.
USB 2.0 CPU
Transmission
DP Out
DP CPU
Main Power:
Insert one of the supplied IEC cables here.
Red. Power:
To provide a second, redundant power supply, connect a portable power
pack to this interface.
Keyb./Mouse
In
Line
Out
USB CPU
Keyb. CPU
RS232
Red. Power
G&D DP1.2-Vision-Fiber · 12
Installation
Werbung
Kapitel
Inhaltsverzeichnis
