1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. In the
EDID profile
ing options:
[Auto]
automatic treatment of EDID data default)
sue of a G&D profile for a particular resolution
GUD DVI ...
EDID profile that has been read out by the user
Name
6. Click on
Save
Reducing the colour depth of the image data to be transmitted
In the default settings, the KVM extender transmits the image information with a
maximum colour depth of 24 bit to the user module.
Using a high resolution and displaying moving images can result in the user module
"skipping" several images.
In such cases, reduce the colour depth of the image data to 18 bits. This way the
data volume to be transmitted can be reduced.
NOTE:
Depending on the image contents, reducing the colour depth may result in
slight colour grades.
How to change the colour depth of the image data to be transmitted:
1. Press
Ctrl+Num
2. Select the row
3. Under
Color depth
transmits the image data with a maximum colour depth
24 Bit:
of 24 bits (default)
18 Bit:
reduces the colour depth of image data to 18 bits
4. Press
F2
to save your settings.
.
KVM extender
.
.
Video channels
Configuration
.
field of the
Video channel
.
(default) to open the on-screen display.
and press
Target setup
press
to select on of the following options:
F8
section, select between the follow-
.
Enter
G&D DP1.2-Vision-Fiber · 40
Configuration