Activate the
generic HID
to connect another USB input device. In this mode, any data of the USB input device
is not altered when transmitted to the computer module.
IMPORTANT:
If the
generic HID
keyboard connected to the
Connect the PS/2 mouse of the console.
Mouse:
Keyb.:
Connect the PS/2 keyboard of the console.
Connecting the console monitor
USB 2.0 Trans.
Serial
Transmission
DVI-D DL Out
Connect the console monitor.
DVI-D DL Out:
Establishing a connection to the computer module
USB 2.0 Trans.
Serial
Transmission
DVI-D DL Out
Transmission x:
Plug a category 5e (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the cable to the respective
interface of the computer module.
mode (see Selecting the USB-HID mode on page 36) if you want
mode is active, the OSD cannot be operated by a
Generic
socket.
Generic
USB 2.0 Devices
Micro In Speaker
Keyb./Mouse
Generic
USB 2.0 Devices
Micro In Speaker
Keyb./Mouse
Mouse
Keyb.
Red. Power
Mouse
Keyb.
Red. Power
G&D DL-DVI-Vision-CAT · 6
Installation