Preparing
3
Attaching the camcorder to the marine pack
(1) Connect the monitor plug.
Connect the monitor plug to AUDIO VIDEO jack.
(2) Connect the remote plug and the microphone plug.
Connect the remote plug to l REMOTE (1) jack, and the microphone plug to MIC
(plug in power) jack (2).
(3) Attach the camcorder.
Insert the camera mounting shoe until it clicks.
(4) Attach the front shell to the rear shell.
Hold the both shells firmly and fasten 3 buckles securely.
Take care not to pinch the remote and microphone cords. If this happens water may
leak in.
(5) Attach the grip.
1
to AUDIO VIDEO jack.
3
Now you ready for underwater recording. Be sure to check that there is no
water leakage before you dive.
8
-EN
2
4
1
2